Home » Housing and Building » Dye Test FAQs
Dye is injected into each exterior storm connection (downspouts and drains) and flushed through with water. A city representative will verify which sewer the dyed water exits in the street. If the water exits the storm sewer, the test passes; if it exits in the sanitary sewer, corrections will be needed.
Sanitary connections to storm sewers are prohibited by law. The Clean Water Act, enforced by US EPA and Ohio EPA, requires the City and property owners to mitigate storm water drainage into the sanitary sewer system to prevent effluent from entering waterways during heavy storm conditions.
Prior to any work on the underground storm system: new construction, additions, laterals, drains, waterproofing, water controlling, etc. A dye test is not currently required for above-ground work on gutters and downspouts.
If a sanitary connection to the storm system is found, the problem must be corrected immediately. If a storm connection to the sanitary system is found, ALL new work must be properly connected. It is likely that eventually every property in Lakewood will be required to remediate incorrect connections. Therefore, BE AWARE that while you are digging or doing planned sewer work can be the most economical time to address any incorrect connections.
If major work is to be done, we strongly recommend making the separation at this time, while the excavation is open.
Call the Building Department at (216) 529-6270, provide your name, phone number, the address where the work is to be performed, and a brief description of the work. The average lead time is two weeks and there is no cost for the initial test.